Table of Contents
Advertisement
Before Installing the NE1064TO
32
NE1064TO Installation Guide
Attention: Product information is required in order to register your NE1064TO,
update its firmware, place a service call, or replace the unit.
Some of the product information labels may be hidden from view once the
NE1064TO is installed. To prevent the need to remove the switch in order to read
required product information, locate and record the information shown on
prior to installation.
Figure 15
contains examples of product information labels.
Figure 15. Sample product labels from the switch
Note: These examples are to help locate and identify the information labels. The
actual labels and information for your specific switch may differ.
The identification labels on the front, rear, and/or bottom of the NE1064TO contain
the Machine Type-Model (MTM) number, serial number, part number of the switch.
These labels also include the Media Access Control (MAC) address (on the rear
panel of unit) of the switch. Though helpful, the MAC address is not required for
opening a service call.
Table 8
Advertisement
Table of Contents
