Table of Contents
Advertisement
980 DP 1.4 Video Generator / Analyzer - User Guide
6.3
Reading the EDID of a downstream MST node.
Use the following procedures to read the EDID of any downstream MST Rx node. Currently the EDID button
shown on the left panel of the Topology window is not functional. To read the EDID of a downstream not you have
to use the EDID read function in the Tools menu.
To read the EDID of a downstream MST Rx node:
1. From the main window of the 980 DP Video Generator / Analyzer module, select the Tools tab.
2. Select EDID Decode and select the virtual port (downstream MST node) whose EDID you wish to read. Refer
to the following screen example.
A window showing all the MST topology will appear.
3. The downstream nodes are shown in blue. Click Refresh if necessary. Select the desired downstream MST Rx
node (Sink-3, Sink-4, Sink-5 in the example below).
Page 98
Rev. A1
June 16, 2017
Advertisement
Table of Contents
