Table of Contents
Advertisement
980 DP 1.4 Video Generator / Analyzer - User Guide
2. Select the EDID that you wish to emulate on the module's Rx port and then click on OK.
The 980 DP Video Generator's Rx port will emulate the EDID you selected.
Refer to the section in the User Guide entitled
to capture EDIDs from HDTVs.
11.5.4 Generating Hot Plug
The 980 DP Video Analyzer enables you to generate a hot plug to cause a source device to read and EDID and
initiate HDCP authentication.
1. Initiate a hot plug from the Tools fly-out menu.
2. Select the Hot Plug tab and click on the Generate Hot Plug activation button to initiate a hot plug. Refer to the
dialog box below.
Page 237
Capturing EDIDs of a connected display
Rev. A1
for instructions on how
June 16, 2017
Advertisement
Table of Contents
