Teledyne 980 DP1.4 User Manual page 109

980 DP 1.4 Video Generator / Analyzer - User Guide
ACA Control Menu
ACA Event Selection
Page 109
There is a menu associated with the ACA Info
panel. It is location on the right side of the
panel. The ACA pull-down menu provides the
following functions:
 Home – Navigates you back to the Home
menu screen of the embedded 980 GUI
Manager.
 Back – Navigates back to the previous
screen in the Real Time mode.
 Nav – Takes you to the Navigation
window.
 Close – Closes out the ACA application.
 Start/Stop – Starts and Stops the
collection of DDC data.
 Resume/Pause – Halts the updates of the
data to the ACA panel to view traces and
allows you to resume.
 Events – Opens up the ACA Event
Selection window (below left) enabling
you to specify the module and port that
you wish to collect trace data from. Also
selects which events you wish to collect.
Use the check boxes to select which event
you wish to collect or collect All Events.
 Options – Opens up a flyout menu
described below-left.
 Data – Opens up flyout menu with the
following options (described below).
 Clear – Clears the ACA Trace Panel.
 Open – Opens an existing trace file stored
on the 980.
 Save – Saves a current trace file to the
980 file system.
Rev. A1
June 16, 2017