Table of Contents
Advertisement
980 DP 1.4 Video Generator / Analyzer - User Guide
5. Scroll and select a format file to use as a starting point for defining your new format.
6. The format parameters of the selected format will appear in the new format Timing window as shown below.
7. Modify the parameters as required for the new format. You can reference the parameter definitions in the
tables presented earlier in this chapter. The following guidelines will help you modify the format parameters.
•
When selecting a parameter to modify on the Timing tab, ensure that the value is editable. To be editable,
the field either needs to have a pencil icon next to it or a black field background. Gray fields are disabled
for editing. Fields in red (with the calculator icon) cannot be modified. However you can change whether a
field can be modified by clicking on the calculator icon which will cause it to change to a pencil icon
allowing you to change its value.
•
Upon modifying a format value hit the enter key to invoke the change. The Format Editor applies the new
value to the timing algorithm and updates any values dependent on the value you entered (or changed).
For example, to change the horizontal resolution to 660, enter the value in the
Active field under Pixels in the Horizontal area.
You will notice that the Format Editor has calculated and written values to the Blank and Period fields as
indicated by the red calculator (
still indicates it is a calculated value by displaying the red calculator.
Page 218
) symbol. Although the Period value has not changed, the Format Editor
Rev. A1
June 16, 2017
Advertisement
Table of Contents
