Teledyne 980 DP1.4 User Manual page 204

980 DP 1.4 Video Generator / Analyzer - User Guide
Field / Entity
10.2.5 New Format - General Tab (Top Right Panel)
The top right panel of the General tab in the Format Editor is shown below.
The table that follows describes each of the fields in the top right panel of the General tab.
Field / Entity Type
Pixel Depth Pull-down menu
10.2.6 New Format – General Tab (Center Panel)
The center paneI of the GeneraI tab in the Format Editor is shown below.
The table below describes the pull-down menus in the center panel of the General tab.
Field / Entity
Color Encoding
Page 204
Type
inches
mm
Description / Function
Establishes the number of data bits that represent each active pixel in video memory
(frame buffer). Parameter: PELD. There are three settings:



Description / Function
Sets the colorimetry of the format. The parameter is AVST or DVST. The
following are the selections:




Description / Function
Selects the unit size of the Horizontal and Vertical Size entities to be
expressed in inches.
Selects the unit size of the Horizontal and Vertical Size entities to be
expressed in millimeters.
Default - uses the generator default
8 - 8 bits-per-pixel (256 colors)
24 - 24 bits-per-pixel (16,777,216 colors)
Digital Component RGB
Digital Component YCbCr SDTV (ITU-R BT.601-5)
Digital Component YCbCr HDTV Legacy (SMPTE 240M)
Digital Component YCbCr HDTV Modern (ITU-R BT.709-5)
Rev. A1
June 16, 2017