Table of Contents
Advertisement
980 DP 1.4 Video Generator / Analyzer - User Guide
3. Access the Topology control application through the Tools tab on the 980 DP Video Generator module
interface as shown below.
The table below summarizes the graphical controls of the MST Topology window.
MST Topology Window
Button
EDID
DPCD
Virtual Channels
VC #1...VC #4
Add
Delete
Page 94
Description
Enables you to read the EDID of the selected downstream MST Rx node.
Note: This activation button is not currently functional. To read the EDID of a
downstream MST node, you must use the EDID read in the Tools menu.
Enables you to read the DPCD of the selected downstream MST Rx node.
Note: This activation button is not currently functional. To read the DPCD of a
downstream MST node, you must use the DPCD read in the Tools menu.
This capability is future.
Enables you to add a downstream MST Rx node.
Enables you to delete a downstream MST Rx node.
Rev. A1
June 16, 2017
Advertisement
Table of Contents
