Teledyne 980 DP1.4 User Manual page 88

980 DP 1.4 Video Generator / Analyzer - User Guide
5. Optionally, select the Non-Adapative link training mode using the tab provided.
6. Specify the Lane Count, Link Rate, Voltage Swing Level and Pre-emphasis level parameters.
7. Click on the Force Train activation button to initiate the link establishment using the parameters you have
specified.
8. Note: You can monitor the link training transactions with the
A few examples are shown below with various settings and the resulting status.
Page 88
Auxiliary Channel Analyzer (ACA)
Rev. A1
if desired.
June 16, 2017