Table of Contents
Advertisement
980 DP 1.4 Video Generator / Analyzer - User Guide
There are three buttons in the middle between the two windows that enable you to configure the test patterns
in your Pattern List. These are defined as follows:
Append – Add a new test pattern to the end of your list.
Insert – Insert a new test pattern into your accumulating list above the test pattern that is highlighted in the
Data List on the right.
Delete – Delete or remove a test pattern from your list.
5. Click on the Save activation button when you are done configuring your custom list. You will be asked to enter
a name for your new Pattern List. Use the Name field provided (below).
Page 169
Rev. A1
June 16, 2017
Advertisement
Table of Contents
