980 DP 1.4 Video Generator / Analyzer - User Guide
LPCM Programmable Sine Wave options
Parameter
Bits per Sample
Channel Selection
Level (dB)
Mute
Frequency (Hz)
Page 48
Description
This is the number of bits per channel of the
audio sine wave test tone.
Indicates the channels that are active. Also
indicates the channel that is configured for the
Level, Mute and Frequency Parameters.
This is the amplitude of the audio sine wave test
tone.
Mutes or unmutes the audio for a particular
channel.
The frequency of the audio sine wave test tone.
Options
16
20
24
FL – Front Left
FR – Front Right
LFE – Low Frequency Effects
FC – Front Center
RL – Rear Left
RR – Rear Right
RLC – Rear Left Center
RRC – Rear Right Center
Increments in 3dB throughout a range of
– 0dB to -99dB (per channel).
On
Off
Programmable throughout a range of –
-0.01kHz to 20kHz (per channel) in
increments of:
1Hz
10Hz
100Hz
1kHz
Rev. A1
June 16, 2017