Teledyne 980 DP1.4 User Manual page 270

980 DP 1.4 Video Generator / Analyzer - User Guide
12.9.1 Scrolling in the Event Plot Panel
A scroll bar is provided to enable you to quickly browse through the data. The scroll bar is under the set of function
icons just above the data panel where the data is displayed. You can also scroll to the end, scroll by page or scroll
incrementally in either direction using the
buttons. See the screen shot below.
12.9.2 Zooming in the Event Plot Panel
You can zoom in and zoom out and pan across the data using the slide bars provided. You can also zoom by
surrounding a specific section of the captured data. These functions are described in the following table.
Even Plot Zoom & Panning Icons
Icons – Zoom and Panning
Page 270
backward and forward activation
Function
 – The back icon enables you to return to the previous
Back
view.
 – The pointer icon enables you to click on any point
Pointer
and obtain information such as the data packet type and the
timestamp, about that data packet. The information is displayed in
a dark panel just above the scroll bar and below the icons.
 – The panning function enables you scan across the
Panning
data quickly by clicking and dragging.
 activation button – You can select an area of the
Surround
Event Plot by clicking and dragging across. When you do this the
new view will be limited to the horizontal range that you selected.
The midpoint of the selection will become the new center of the
data displayed.
activation button – You can select an area of the

Surround
Event Plot by clicking and dragging across. When you do this the
Rev. A1
June 16, 2017