Table of Contents
Advertisement
980 DP 1.4 Video Generator / Analyzer - User Guide
Item
Port
INTF
FMT
IMG
Video Identification Code (VIC)
Resolution, scan and color
H:(Rate)
F:(Rate)
P:(Pixel Rate)
Please note that if you are also making changes through the command line the information in the status area is
not automatically updated. You must click on the Refresh
area.
Page 25
Description
Active port, in this case the two Tx connectors (T30 and T31).
The currently selected interface type for the module. This could be either, DP, HDMI or
DVI. The sampling mode is included in parentheses after the interface.
The currently active format (selected resolution) and its directory path.
The currently active image (selected test pattern) and its directory path.
The VIC code is shown on the lower left of the upper status panel
The resolution, scan and colorimetry type are shown on in the lower portion of the
upper status panel in the center.
The horizontal refresh rate of the selected timing.
The frame or vertical refresh rate of the selected timing.
The pixel clock rate of the selected timing.
activation button to re-sync the status
June 16, 2017
Rev. A1
Advertisement
Table of Contents
