Teledyne 980 DP1.4 User Manual page 257

980 DP 1.4 Video Generator / Analyzer - User Guide
Capture Control Panel - Function
Page 257
Item - Description
(Capture Tab) want to capture. This could be:


Trigger Symbol If Specified Symbol is selected then select one
(Capture Tab) of:











Start Capture Initiates a capture using the criteria defined in
(Capture Tab) the Trigger Mode and Trigger Symbol.
Extract Video Enables you to view the video frames that were
Frames captured.
Save raw Enables you to save raw hex debug data.
debug data
Start of Vertical Blanking (SST) or SR
symbol MST.
Specified Symbol (see below).
BS=Blanking Start
BE=Blanking End
BF=Blanking Fill
C0-C7=VC Payload Fill Control code
sequence
CP=Content Protection
FE=Fill End, FS=Fill Start
R0-2
SE=Secondary Data End
SR=Scrambler Reset,
SS=Secondary Data Start
Other.
Rev. A1
June 16, 2017