Teledyne 980 DP1.4 User Manual page 205

980 DP 1.4 Video Generator / Analyzer - User Guide
Field / Entity
Sync Type
Not used for HDMI
ACS Type (Not used)
DCS Type (Not used)
SubCarrier (Not used)
10.2.7 New Format - General Tab (Right Panel)
The right panel of the General tab in the Format Editor is shown below.
The table below describes the entities and fields of the right-side panel of the General tab.
Field / Entity
Analog Video Swing
Not used for HDMI
Analog Sync Swing
Page 205
Description / Function


Note: Several options are not shown and are not applicable to HDMI.
Sets the sync type of the format. The following are the selections:











Note: Several options are not shown and are not applicable to HDMI.
Not used for DP
Not used for DP
Not used for DP
Entity Type
Entry field
Entry field
Digital BT.601 xvYCC
Digital BT.709 xvYCC
(0) None
(1) DSS - Digital Separate Sync
(2) DCS - Digital Composite Sync
(3) ACS - Analog Composite Sync
(4) ACS, DSS - Analog Composite Sync, Digital Separate Sync
(5) ACS, DCS - Analog Composite Sync, Digital Composite Sync
(6) ACS, DCS, DSS - Analog Composite Sync, Digital Composite Sync
and Digital Separate Sync
(7) DPMS OFF
(8) DPMS Suspend
(9) DPMS Standby
(10) DPMS ON
Description / Function
Sets the analog video swing.
Sets the analog sync swing.
Rev. A1
June 16, 2017