Teledyne 980 DP1.4 User Manual page 19

980 DP 1.4 Video Generator / Analyzer - User Guide
Use the following table to identify the connector function and descriptions on your 980R system configuration.
980B Configurations
DP Video Generator module – 980R
F E
G D
H
I
J
Page 19
Information / Function
The following is a description of each connector:
980 DP Video Generator / Analyzer module:

A


B
C
980B QD Bus Board:





980B Lower Panel:


A – DP Rx port for analyzing DP sources.
B – DP Tx1 port for DP video/audio generation.
C – DP Aux Passive Monitoring module Tx and Rx
for passively monitoring the DP Aux Chan
between a source and a display.
Note: This feature is not currently functional.
D – Internal Ethernet Tx connector; not used.
E – BNC Trig OUT connector. Not used for this
module.
F – BNC Trig IN connector. Not used for this
module.
G – RCA OUT connector for SPDIF function. Not
used for this module.
H – RCA IN connector for SPDIF function. Not
used for this module.
I – Ethernet port for connection to PC host for 980
GUI Manager application, telnet for command line
control and FTP for transferring files.
J – Various USB ports for transferring files and
restoring system.J – Various USB ports for
transferring files and restoring system.
Rev. A1
June 16, 2017