Internal Memory Size Switching Register - NEC 78K0 User Manual

23.1 Internal Memory Size Switching Register

µ
The PD78F0114 allows users to select the internal memory capacity using the internal memory size switching
register (IMS) so that the same memory map as that of the mask ROM versions with a different internal memory
capacity can be achieved.
IMS is set by an 8-bit memory manipulation instruction.
RESET input sets IMS to CFH.
Caution Be sure to set the value of the relevant mask ROM version at initialization.
Figure 23-1. Format of Internal Memory Size Switching Register (IMS)
Address: FFF0H After reset: CFH
Symbol 7
IMS RAM2
RAM2
0
1
ROM3
0
0
0
1
The IMS settings required to obtain the same memory map as mask ROM versions are shown in Table 23-2.
Table 23-2. Internal Memory Size Switching Register Settings
Caution When using a mask ROM version, be sure to set the value indicated in Table 23-2 to IMS.
CHAPTER 23
R/W
6 5
RAM1 RAM0
RAM1 RAM0
1 0 512 bytes
1 0 1024 bytes
Other than above Setting prohibited
ROM2 ROM1
0 1
1 0
1 1
0 0
Other than above
Target Mask ROM Versions
µ
PD780111
µ
PD780112
µ
PD780113
µ
PD780114
User's Manual U16227EJ2V0UD
µ
PD78F0114
4 3 2
0 ROM3 ROM2
Internal high-speed RAM capacity selection
ROM0 Internal ROM capacity selection
0 8 KB
0 16 KB
0 24 KB
0 32 KB
Setting prohibited
IMS Setting
42H
44H
C6H
C8H
1 0
ROM1 ROM0
377