Programme End; Switching Off; Unloading The Dishwasher - Miele PG 8083 SCVi Operating Instructions Manual

Programme end

At the end of a programme, the In-
operation indicator light will be visible
flashing slowly with the door shut.
The programme has finished when

Finished or AutoOpen
display and the door has opened
slightly (if applicable).
If Extra drying was selected and
AutoOpen is active, the drying fan will
run for a few minutes after the
programme has ended.
 Open the door completely to re-
engage the door closing mechanism.
You can now empty the dishwasher.
The In-operation indicator light will go
out 10 minutes after the end of the
programme if the door is closed.

If you have deactivated the
automatic door opening function (see
"Settings menu,
would still like to open the door at
the end of the programme, then
make sure that you open the door
fully.
Otherwise steam from the
dishwasher could damage the edge
of the worktop because the fan is no
longer running.
appears in the
AutoOpen "), but

Switching off

At the end of a programme:
 Open the door.
 Switch the dishwasher off with the 
button.
The dishwasher will continue to use
electricity until it is switched off with
the  button.
Tip: If the dishwasher is not going to be
used for a longer period of time, e.g.
whilst on holiday, the stopcock should
be closed.

Unloading the dishwasher

Dishes tend to break and chip more
easily when they are hot. Allow the
dishes to cool until they are comfortable
enough to handle before unloading
them.
If you open the door fully after switching
off, the dishes will cool much faster.
First unload the lower basket, then the
upper basket and finally the cutlery tray
(depending on model).
This will prevent water drops from the
upper basket and cutlery tray from
falling onto the dishes in the lower
basket.
Operation
39