Energy Management; At The End Of The Programme - Miele HG05-W Operating Instructions Manual

Energy management

To save energy, the dishwasher will
switch off automatically 10 minutes
after the last time a sensor has been
pressed or 10 minutes after the end of
the programme.
 Press the  sensor to switch the
dishwasher back on.
The dishwasher will not switch off auto-
matically if the time of day display has
been activated (see "Settings menu,
Time of day").
The dishwasher will not switch off
whilst a programme is running, during
the Delay start period or if there is a
fault.

At the end of the programme

The buzzer might sound at the end of
the programme.
The programme has finished when
finished appears in the display and the
door has opened slightly (if applicable).
In the QuickPowerWash
door will not open until a few minutes
after the programme has finished.
If the Display consumption
function is switched on, you can now
use the Consumption
actual energy and water consumption
of the programme which has just fin-
ished (see ""Settings, Consumption").
The drying fan may continue to run for
a few minutes at the end of the pro-
gramme.
You can now empty the dishwasher.
Prog.
programme the
programmable
option to view the

If you have deactivated the auto-
matic door opening function (see
"Settings menu, AutoOpen"), but
would still like to open the door at
the end of the programme, then
make sure that you open the door
fully.
Otherwise steam from the dish-
washer could damage the edge of
the worktop because the fan is no
longer running.
Operation
47