Autoopen; Optimise Standby - Miele PG 8083 SCVi Operating Instructions Manual

AutoOpen

To improve drying, the door
automatically opens a little at the end of
a programme, except for Pre-wash,
Short and Beer glasses (see
"Programme chart").
With the Medium, Intensive and
Glasses programme, AutoOpen can
only be activated by selecting Extra
drying (see "Additional functions, Extra
drying").
With the ECO programme the door
opens during the drying phase.
This function can be deactivated if
wished.
 Select the desired setting and press
the middle button to confirm.

If you have deactivated the
automatic door opening function but
would still like to open the door at
the end of the programme, make
sure that you open the door fully.
Otherwise steam from the
dishwasher could damage the edge
of the worktop because the fan is no
longer running.

Optimise standby

To save energy, the dishwasher will
switch to Standby mode a few minutes
after the last time a button has been
pressed or a few minutes after the end
of the programme. The display and
indicator lights will go out and only the
 indicator light will flash slowly.
If the dishwasher is not turned off at the
end of the programme, it will switch off
completely after a few minutes in
Standby mode.
Optimise standby can be switched off if
you prefer. If you do this the display and
indicator lights will not go out and the
duration before the dishwasher
switches off automatically increases to
approx. 6 hours.
Doing this will increase energy
consumption.
 Select the desired setting and press
the middle button to confirm.
The dishwasher will not switch into
Standby mode whilst a programme is
running, if salt or rinse aid needs to
be replenished or there is a fault.
Settings menu
73