End of the programme
The programme has ended when the
display shows the message
In some programmes, if the "AutoOpen"
function is activated, the door will
automatically open slightly (see
"Settings – AutoOpen"). This improves
the drying process.
If the
Consumption
function is switched on, you can now
display the actual energy and water
consumption of the programme that
has just finished (see "Caring for the
environment – EcoFeedback
consumption indicator").
The drying fan may continue to run for
a few minutes at the end of the
programme.
Risk of damage due to steam.
Steam from the dishwasher could
damage delicate housing units and
the edges of worktops when you
open the door at the end of the
programme if the fan is no longer
running.
If you have deactivated the
automatic door opening function (see
"Settings – AutoOpen"), but would
still like to open the door at the end
of the programme, then make sure
that you open the door fully.
Finished
programmable
Energy management
To save energy, the dishwasher will
.
switch off automatically 10 minutes
after the last time a button is pressed or
after the end of a programme.
You can switch the dishwasher back on
again with the button.
The dishwasher will not switch itself
off whilst a programme is running or if
there is a fault.
Operation
65