Display Functions - Miele PG 8083 SCVi Operating Instructions Manual

Display functions

General
The display is used to select or set the
following:
– the programme
– the delay start time
– settings
During a programme, the display shows
the following:
– the stage the programme is at
– the estimated time left for the
programme to run
– any relevant fault messages and
information
To save energy, the dishwasher will
switch to Standby-mode within a few
minutes if no programme is running
and no button is pressed. After several
more minutes it switches off
completely (see "Operation,
Standby").
Press the  button to switch the
dishwasher back on.
Commissioning
Settings menu
The Settings menu is used to alter the
dishwasher's electronics to suit
different requirements.
The Settings menu is accessed by
pressing a specific button combination.
For more information see "Settings
menu".
In the Settings menu, the normal
functions of the buttons to the right next
to the display are not active allowing
you to select and confirm menu items
with these buttons.
The arrows on the left and right of the
display indicate that further options are
available. You can use the arrow
buttons next to the display, as
appropriate, to select these further
options.
Use the middle button next to the
display to confirm messages or settings
and to switch to the next menu or
submenu.
A tick  will appear beside the option
which is currently selected.
19