Table of Contents
Advertisement
Operation
End of the programme
At the end of a programme, the in-oper-
ation indicator light will flash slowly with
the door shut. The buzzer might also
sound.
The in-operation indicator light will go
out 10 minutes after the end of the pro-
gramme if the door is closed.
The programme has ended when the
display shows the message
In some programmes, if the "AutoOpen"
function is activated, the door will auto-
matically open slightly (see "Settings –
AutoOpen"). This improves the drying
process.
If the
Consumption
tion is switched on, you can now dis-
play the actual energy and water con-
sumption of the programme that has
just finished (see "Caring for the envir-
onment – EcoFeedback consumption
indicator").
The drying fan may continue to run for
a few minutes at the end of the pro-
gramme.
If you are not satisfied with the clean-
ing or drying results, you can activate
the Extra clean or Extra dry functions
to boost the performance of the pro-
grammes (see "Extra clean" or "Extra
dry" under "Extras").
62
Finished
programmable func-
Risk of damage due to steam.
Steam from the dishwasher could
damage delicate housing units and
the edges of worktops when you
open the door at the end of the pro-
gramme if the fan is no longer run-
ning.
If you have deactivated the auto-
matic door opening function (see
"Settings – AutoOpen"), but would
.
still like to open the door at the end
of the programme, then make sure
that you open the door fully.
Energy management
To save energy, the dishwasher will
switch off automatically 10 minutes
after the last time a button is pressed or
after the end of a programme.
You can switch the dishwasher back on
again with the button.
The dishwasher will not switch itself
off whilst a programme is running or if
there is a fault.
Advertisement
Table of Contents
