Miele PG 8083 SCVi Operating Instructions Manual page 11


The electrical safety of this machine can only be guaranteed when
correctly earthed. If in any doubt, please have the electrical
installation tested by a qualified electrician. Miele cannot be held
liable for the consequences of an inadequate earthing system (e.g.
electric shock).

Please follow the advice on installation in these instructions and
the separate Installation diagram.

Before connecting the appliance, ensure that the connection data
on the data plate (voltage, frequency and fuse rating) match the
mains electrical supply.

There must be no electrical sockets behind the dishwasher.
Danger of overheating and fire risk if the dishwasher were to be
pushed up against a plug. See "Electrical connection".

Do not connect the dishwasher to the mains electricity supply via
a multi-socket unit or an extension lead. These do not guarantee the
required safety of the machine (e.g. danger of overheating).

Warning. Do not open the casing of the dishwasher. Any contact
with live connections or tampering with the electrical or mechanical
components of the dishwasher will endanger your safety and may
lead to machine malfunctions.

The dishwasher must not be used if the electrical connection
cable is damaged. A damaged connection cable may only be
replaced with a specific connection cable of the same type (available
from Miele Service). For safety reasons, such replacement may only
be carried out by a qualified technician or the Miele Service.

The dishwasher must be disconnected from the mains electricity
supply before any maintenance or repair work is carried out.

The plastic housing of the water connection contains electrical
components. It must not be dipped in water.

There are electrical wires in the water inlet hose. Do not shorten
the water inlet hose, even if it is too long.
Warning and Safety instructions
11