Additional Functions; Extra Drying; Delay Start - Miele PG 8083 SCVi Operating Instructions Manual

Extra drying

For better drying results and to reduce
the amount of steam that escapes
when the door is opened, the Extra
drying function extends the fan runtime
at the end of the programme. This
function is not available for all
programmes (see "Programme chart").
When Extra drying is selected, the
programme duration will increase by
approx. 20-30 minutes, depending on
the programme.
 Open the door.
 Switch the dishwasher on with the 
button.
The  indicator will light up.
 Select a programme.
 Press the  button.
The "" indicator light will come on if
the option is available for the
programme selected.
 Start the programme by closing the
door.

Additional functions

Delay start

The start time of a programme can be
delayed, e.g. to benefit from cheaper
electricity tariffs at night. A delay start
time of between 30 minutes and
24 hours can be selected. The delay
start time is set in 30 minute steps.
When using the Delay start function,
make sure that the detergent
compartment is dry before adding
detergent. Wipe dry with a cloth if
necessary.
If the compartment is wet, powder
detergent can become lumpy and
stick to the dispenser, with the result
that it is not fully dispensed.
 Open the door.
 Switch the dishwasher on with the 
button.
The  indicator will light up.
 Select the programme required with
the programme selector button.
 Press the  button.
The last delay start time will appear in
the display. The  indicator will light
up.
 Set the required time using the 
button.
If you keep the Delay start button
pressed in, the time will increase
automatically up to
30 minutes again, press the  button
twice.
 Close the door.
24:00 h . To start at
41