Dukane i220 User Manual page 76

iQ Series
Ultrasonic Integrated Press System i 220 User's Manual
Miscellaneous Sub-menu Items
The three sub-menu items and their corresponding dis-
plays are shown to the right in Figure 5-44.
Buzzer
1)
Set the audible buzzer to sound:
At Top of Stroke - Enable or Disable, or
At Trigger - Enable or Disable
2)
Latch on Bad Part
Enable or Disable this feature.
When Latch on Bad Part is enabled, the cycle
stops when a bad part is detected. The operator must
deal with this before a new weld cycle can begin.
Restore Factory Defaults
3)
Press the RESTORE soft key to erase ALL setups
and factory defaults.
An intermediate display prompts confirmation with
a YES or NO.
If YES is chosen, then another message is displayed
as shown to the right.
Page 68
Continued from Previous Page
DISABLE
ENABLE
DISABLE
ENABLE
DISABLE
ENABLE
YES
NO
FACTORY DEFAULTS HAVE BEEN RESTORED.
Figure 5-44 Miscellaneous Sub-menu Items
MISCELLANOUS
>
BUZZER
At TOP OF STROKE
AT TRIGGER
LATCH ON BAD PART
RESTORE FACTORY DEFAULTS
MISCELLANOUS
BUZZER
At TOP OF STROKE
AT TRIGGER
>
LATCH ON BAD PART
RESTORE FACTORY DEFAULTS
MISCELLANOUS
BUZZER
At TOP OF STROKE
AT TRIGGER
LATCH ON BAD PART
>
RESTORE FACTORY DEFAULTS
WARNING: ALL SETUPS WILL BE
ERASED AND FACTORY DEFAULTS WILL
BE RESTORED. ARE YOU SURE YOU
WANT TO PROCEED?
Dukane Manual Part No. 403-594-02
ONLINE
DISABLED
DISABLED
DISABLED
DISABLED
ONLINE
DISABLED
DISABLED
DISABLED
DISABLED
ONLINE
DISABLED
DISABLED
DISABLED
DISABLED
ONLINE
ONLINE