Dukane i220 User Manual page 36

iQ Series
Ultrasonic Integrated Press System i 220 User's Manual
Power Cords
The AC line cords supplied are matched to the ultrasonic
output power rating and the continent of specified use.
See Table 3-II below.
Page 28
CAUTION
The compressed air for the
thruster must be clean, dry
and oil free. Any particu-
late, oil contamination or
moisture can coat or clog
the valves, sensors and cylinder walls.
This can result in premature failure of
the regulator, pressure transducer, air
cylinder or other components of the
pneumatic system.
CAUTION
The power cord is equipped
with a three-prong, ground-
ed-type plug for your
safety. Whenever a two-slot receptacle
is encountered, we strongly recom-
mend that it is replaced with a properly
grounded three-lead receptacle.
Have a qualified electrician do the
replacement in accordance with the
National Electrical Code and local
codes and ordinances. DO NOT cut
off the power cord grounding prong or
alter the plug in any way.
Continent of Use
Part Number
North America
Continental Europe
Table 3-II Power Cords
NOTE
Under normal usage, do not apply
more than 24 VDC @ 2 Amps to the
contacts at J1.
Dukane Manual Part No. 403-594-02
Power Cord Power
200 - 1110 240V, 15A
200 - 1541 240V, 10A
200 - 1111 240V, 16A
200 - 1542 240V, 10A