iQ Series
Ultrasonic Integrated Press System i 220 User's Manual
Stack Description
The acoustic stack shown in Figure 7-1 consists of three
parts:
•
Transducer
•
Booster
•
Horn
The transducer and the booster are normally shipped
assembled and installed in the press. The horn and/or the
fixture may be shipped separately.
The stack is easily removed from or installed in the press/
thruster. This makes it possible to change the horn or booster.
It also makes it easier to perform regular inspections and/or
maintenance of the stack components.
BOOSTER
HORN
Figure 7-1
Stack Components
Page 80
TRANSDUCER
Mounting Ring
Spanner Wrench Hole (Typical)
Contact Button
Transducer Housing
Anti–Rotation Pins
Mounting Stud
Dukane Manual Part No. 403-594-02