Limits; Setup - Dukane i220 User Manual

iQ Series
Ultrasonic Integrated Press System i 220 User's Manual

LIMITS

The LIMITS menu seen in Figure 5-24, illustrates the dis-
play that is shown when either in MANUAL PRESS or
AUTOMATED PRESS mode.
In the example shown to the right, the DISPLAY soft key
was pressed to select ENABLED. Press the key again to
select DISABLED.
When the BAD soft key is pressed (in the menu shown in
Figure 5-24 above), the display will appear as it does in
Figure 5-25 to the right.
Selecting ENABLED will change the menu to what is
shown in Figure 5-26.
The LIMITS menu shown in Figure 5-26 allows setting
upper and lower limits. Use the soft keys to highlight the
parameter value to be changed. Press DONE to return to
the main LIMITS menu.
The example menu shown in Figure 5-27 appears when
BAD PART LIMITS are enabled for TIME.
Page 58
BAD
DISABLED >
DISPLAY
ENABLED
PRE
AMP WELD
WELD
Figure 5-24 Limits Menu
DISABLED
ENABLED
PRE
AMP WELD
WELD
Figure 5-25 Limits Menu, Bad Soft Key Pressed
UPPER LIMIT
30.000s
LOWER LIMIT
0.000s
DONE
PRE
AMP WELD
WELD
Figure 5-26 Limits Menu, Setting Upper and Lower
Limits
BAD
>
ENABLED
DISPLAY
ENABLED
PRE
AMP WELD
WELD
Figure 5-27 Limits Menu, Bad Parts Limits Enabled for
Time
NOTE
The Limits menu items, Weld Distance
and Weld Position would not appear in
units that do not support distance.
Dukane Manual Part No. 403-594-02
DOWNSTROKE TIME
TIME
ENERGY
WELD DISTANCE
WELD END POSITION
POST
LIMITS SETUPS
OPERATE

SETUP

WELD
WELD TIME
BAD PART LIMIT
POST
LIMITS SETUPS
OPERATE
SETUP
WELD
WELD TIME
BAD PART LIMIT
POST
LIMITS SETUPS OPERATE
SETUP
WELD
DOWNSTROKE TIME
TIME
ENERGY
WELD DISTANCE
WELD END POSITION
POST
LIMITS
SETUPS OPERATE
WELD SETUP
ONLINE
LIVE
ONLINE
LIVE
ONLINE
LIVE
ONLINE
LIVE