ABB RELION RET670 Applications Manual page 121

1MRK 504 163-UUS A
Transformer protection RET670 2.2 ANSI
Application manual
IEC140000118 V2 EN-US
Figure 34: Multiple instances of PMUREPORT function block
Figure 35 shows both instances of the PHASORREPORT function blocks. The
instance number is visible in the bottom of each function block. For each instance,
there are four separate PHASORREPORT blocks including 32 configurable phasor
channels (8 phasor channels in each PHASORREPORT block). Each phasor channel
can be configured as a 3-phase (symmetrical components positive/negative/zero) or
single-phase phasor (A/B/C).
IEC140000119 V2 EN-US
Figure 35: Multiple instances of PHASORREPORT blocks
Figure 36 shows both instances of ANALOGREPORT function blocks. The instance
number is visible in the bottom of each function block. For each instance, there are
three separate ANALOGREPORT blocks capable of reporting up to 24 Analog signals
(8 Analog signals in each ANALOGREPORT block). These can include for example
transfer of active and reactive power or reporting the milliampere input signals to the
PDC clients as defined in IEEE C37.118 data frame format.
Wide area measurement system
IEC140000118-2-en.vsd
IEC140000119-2-en.vsd
Section 6
115