9.7.3
Power Loss of Components in Rated Operation
The following table shows the power loss for components. The characteristic values apply for
the following conditions:
• Line supply voltage for Power Modules 1-ph. 200 V AC to 3-ph. 380 V to
• Pulse frequency of the Power Modules 4 kHz
• Rated pulse frequency of the Power Modules 8 kHz
• Operating components at their rated power
Table 9-8
Control Units
CU320
CU310 DP
CU310 PN
CUA31
Line reactors
for Power Modules Blocksize
Line filter
for Power Modules Blocksize
PM340
Sensor Modules
SMC10
SMC20
Equipment Manual AC Drive
Manual, (GH6), 03/2006 Edition, 6SL3097-2AL00-0BP0
480 V AC ±10 %.
Overview of power losses
Cabinet design and EMC for components, Blocksize format
Unit
W
W
W
W
W
W
W
W
W
9.7 Information on cabinet cooling
Power loss
20
20
20
7.2
Refer to Line reactors,
Chapter "Technical data".
Refer to Line filter,
Chapter "Technical data".
Refer to Power Modules,
Chapter "Technical data".
< 10
< 10
9-21