Siemens SINAMICS S120 Equipment Manual page 214

Supplementary system components and encoder system integration
7.1 Basic Operator Panel 20 (BOP20)
Overview of displays and keys
Figure 7-2
Table 7-1 Displays
Display Meaning
top left The active drive object of the BOP is displayed here.
2 positions The displays and key operations always refer to this drive object.
RUN Is lit (bright) if the displayed drive is in the RUN state (in operation).
top right The following is displayed in this field:
2 positions
•
•
•
•
Source object of a BICO interconnection to a drive object different than the active one.
S Is (bright) if at least one parameter was changed and the value was not transferred into the non-
volatile memory.
P Is lit (bright) if, for a parameter, the value only becomes effective after pressing the P key.
C Is light (bright) if at least one parameter was changed and the calculation for consistent data
management has still not been initiated.
Below, 6 position Displays, e.g. parameters, indices, faults and alarms.
7-2
Overview of displays and keys
More than 6 digits: Characters that are present but cannot be seen (e.g. "r2" ––> 2 characters
to the right are invisible, "L1" ––> 1 character to the left is invisible)
Faults: Selects/displays other drives with faults
Designation of BICO inputs (bi, ci)
Designation of BICO outputs (bo, co)
Equipment Manual AC Drive
Manual, (GH6), 03/2006 Edition, 6SL3097-2AL00-0BP0