Operating and installation Instructions Washing machine To avoid the risk of accidents or damage to the appliance, it is essential to read these instructions before it is installed and used for the first time. en-AU, NZ M.-Nr. 11 213 030...
Contents Caring for the environment .................. 6 Warning and Safety instructions................ 7 Operating the washing machine ................ 15 Control panel ......................15 Sensor controls and touch display with sensor controls ........16 Main menu......................16 Examples on how to operate the appliance ............17 Operating the laundrette version ................
Contents Special features in the programme sequence.......... 52 Spinning ........................ 52 Anti-crease ......................52 Changing the programme sequence .............. 53 Changing a programme..................53 Cancelling a programme ..................53 Switching on the washing machine after an interruption to the power supply ..53 Adding or removing laundry ..................
Contents Water connection ....................78 Cold water connection ..................78 Hot water connection*..................79 Drainage ........................ 80 Drain valve ......................80 Drain pump....................... 80 Electrical connection ..................... 81 Technical data...................... 82 Supervisor level .................... 83 Opening the Supervisor level ................83 Code-based access ....................
Contents Process technology....................90 Anti-crease ....................... 90 Water level Cottons ..................90 Water level Minimum iron ................. 90 Pre-wash temp. Cottons .................. 90 Wash time......................90 Pre-rinse Cottons ..................... 91 Pre-rinse Minimum iron ..................91 Pre-wash Cotton/M.iron ................... 91 Cottons rinses ....................91 Minimum iron rinses ..................
Caring for the environment Disposal of the packing Disposing of your old material appliance The transport and protective packaging Electrical and electronic appliances has been selected from materials which often contain valuable materials. They are environmentally friendly for also contain specific materials, disposal, and can normally be recycled.
“Installation”, as well as in the “Warning and Safety instructions”. Miele cannot be held liable for injury or damage caused by non- compliance with these instructions. Keep these operating instructions in a safe place and pass them on to any future owner.
Warning and Safety instructions This washing machine is intended for commercial use in small businesses, care homes, sports clubs, hospitals and other similar commercial environments. This machine may also be operated by lay persons in public areas such as laundrettes, communal laundry rooms or similar.
It is most important that this basic safety requirement is present and regularly tested and, when there is any doubt, the on-site wiring system should be inspected by a qualified electrician. Miele cannot be held liable for the consequences of an inadequate earthing system (e.g. electric shock). ...
Warning and Safety instructions If the electrical connection cable is faulty, it must only be replaced by a Miele authorised service technician to protect the user from danger. The washing machine must be connected to the water supply using the new hose set supplied with the appliance.
It is not suitable for room lighting. Replacement lamps may only be installed by a Miele authorised technician or by Miele. Reliable and safe operation of this washing machine is only ensured if it has been connected to the mains electricity supply.
If, however, you do wish to descale it, only use special non-corrosive descaling agents and strictly observe the instructions on the packaging. Special descaling agent is available from your Miele dealer or from Miele. Strictly observe the instructions for the packaging. ...
Warning and Safety instructions Only use dyes suitable for use in a washing machine. Always observe the manufacturer's instructions carefully. Dye removers contain sulphur compounds which can cause damage such as corrosion. Dye removers must not be used in the washing machine.
Miele tumble dryer and your Miele washing machine. If installing the machine on a Miele plinth (available as an optional accessory), please make sure you order the correct one for this washing machine.
Operating the washing machine Control panel a Language sensor control e Optical interface For selecting the current user For service technicians. language. f Button The operator language is displayed For switching the washing machine again at the end of the programme. on and off.
Operating the washing machine Sensor controls and touch Main menu display with sensor controls After switching on the washing machine, the main menu will appear in The , and Start/Stop sensor the display. controls and the sensor controls in the display react to finger contact. Every You can access all important submenus touch of a sensor is confirmed by an from the main menu.
Operating the washing machine Extras menu (multiple selection) Examples on how to operate the appliance Extras 11:02 Selection lists Pre-wash Rinse plus Programme menu (single selection list) Programmes 11:02 Soak Intensive White items Minimum iron Express Touch one or several Extras to select Coloured...
Operating the washing machine Time Pull-down menu The pull-down menu can be used to display information, e.g. about a wash programme. 12 00 Status 11:02 2:27 Time left Briefly touching the number between Main wash Coloured the two lines will bring up the numerical items...
Operating the washing machine Laundrette extended (12 Operating the laundrette programmes) version 11:02 The entry menu will vary depending on the programming status (see “Supervisor level - Controls”). Shortcuts are the easiest way to operate the machine. Operators cannot Coloured Minimum iron Woollens...
Please observe the instructions in process. After that, they must be “Installation and connection”. changed by Miele. Complete the initial commissioning Emptying the drum process. A swivel elbow for the drain hose and/...
Using for the first time Reference to external Setting the date appliances Date A reference to external hardware 2021 appears. June 2020 Confirm with the sensor. July 2019 Before the initial commissioning, August 2018 connect the XCI box or slide a September 2017 communication module into the slot...
Using for the first time Setting the time of day Selecting programme packages Time You can select various programmes from the programme packages. Any programmes already active are marked 12 00 in orange. Programme packages 11:02 Label Sport Cottons...
Cold These settings can only be changed during the initial commissioning process. If you wish to change the settings later, please contact Miele. If you do not wish to set up a payment Touch the Cold sensor if the washing system, you can skip this step.
Using for the first time Programmes 11:02 Removing the transit bars The display will remind you to remove White items Minimum iron Express the transit bars. Damage resulting from failure to Coloured Delicates Woollens remove the transit bars. items Failure to remove the transit bars can result in damage to the washing...
1. Preparing the laundry Emptying all pockets Damage due to solvent-based cleaning agents. Cleaning agents containing benzine, stain remover, etc., can damage plastic parts. When pre-treating garments, make sure that any plastic parts (e.g. buttons) do not come into contact with cleaning agent.
2. Loading the washing machine Opening the door Closing the door Reach under the door grip and pull Make sure that no items are caught the door open. between the door and the seal. Check the drum for pets or foreign objects before loading it with laundry.
3. Selecting a programme Alternatively, you can select a Switching on the washing programme from the Favourites menu. machine The programmes under Favourites can Press the button. be changed by the operator (see The interior drum lighting will come on. “Supervisor level - Favourite programmes”).
4. Selecting programme settings Selecting the load Selecting Extras To enable load specific dispensing, You can select Extras for some wash you can specify the load for some programmes. programmes. Touch the Extras sensor. Touch the Weight sensor. ...
5. Adding detergent There are several options for adding Adding detergent detergent. Detergent dispenser drawer Any detergent suitable for automatic front loading washing machines can be used with this appliance. Detergent dispensing Please follow the detergent manufacturer's instructions in relation to dosage.
5. Adding detergent Adding fabric softener or liquid Adding starch separately starch separately Prepare the starch solution in Select the Separate rinse programme. accordance with the manufacturer’s instructions on the packaging. Change the spin speed if necessary. Select the Starch programme. ...
Each capsule contains the correct amount for one wash cycle. Capsules are available to order from Miele or from the Miele online shop (see the end of this booklet for contact details). Capsules pose a health risk.
Close the detergent dispenser systems is required. This must be fitted drawer. by a Miele authorised service The capsule is opened by the act of technician. inserting it in the detergent dispenser compartment. The contents can run out of the capsule if you remove it before it has been used.
6. Starting the programme - the end of the programme Payment system At the end of the programme If your machine is connected to a The door remains locked during the payment system, the amount of anti-crease phase. However, the door payment required will appear in the can be unlocked at any time by display.
Timer The Timer can be used to select the Starting the Timer time at which a programme starts or Touch the Start/Stop sensor. finishes. The door will lock and the time Setting the Timer remaining until the programme starts will appear in the display.
Programme chart Cottons / Max. load 8.0 kg Items Normally soiled cotton garments Notes – These settings are the most efficient in terms of energy and water consumption for washing cottons. – With , the actual wash temperature reached is lower than 60°C although the wash performance is the same as with the standard Cottons 60°C programme.
Programme chart Programme packages You can select various programmes from the programme packages. The programmes will be displayed in the programme list. Standard programmes Cottons 75°C to 90°C Max. load 8.0 kg Items Cottons and linens, e.g. bed linen, table linen, towelling, underwear, baby clothes Notes An additional pre-rinse can be programmed.*...
Programme chart Express Cold to 60°C Max. load 4.0 kg Items Cotton garments that have hardly been worn or are only very lightly soiled 1400 rpm Extras: Rinse plus Rinse cycles: 1 Woollens Cold to 40°C Max. load 3.0 kg Items Machine-washable woollens and woollen blends Notes...
Programme chart Silks Cold to 30°C Max. load 3.0 kg Items Silks and hand-washable textiles which do not contain wool Notes – Observe the instructions on the care label. – Place stockings and bras in a laundry bag. 600 rpm Extras: Rinse plus, Rinse hold Rinse cycles: 2 Separate rinse...
Programme chart Machine hygiene No load – If a programme at a temperature below 60°C has been used, the prompt to start the Maintenance wash hygiene programme will appear in the display. The Hygiene setting must be switched on for this purpose (see “Supervisor level”). –...
Programme chart Hard items Cold to 40°C Max. load 3.5 kg Items Washable plastic items, e.g. toy building blocks or casino chips, or even chain link safety gloves, etc. Notes – Use the Soak Extra to loosen dirt. – Use detergent for delicates. –...
Programme chart Proofing Cold to 40°C Max. load 3.5 kg Items Treating microfibre fabric, ski wear, and table linens/drapes made from mainly synthetic fibres – Add proofing agent to the compartment. Notes – The items should be freshly laundered and spun or dried before proofing.
Programme chart Table linen 40°C to 75°C Max. load 4.0 kg Items Tablecloths and napkins made from cotton, linen, and mixed fibres Notes – Select Pre-wash for stubborn stains. Use detergent with enzymes for the pre-wash. – The items are always soaked after the start. 1200 rpm Extras: Pre-wash, Soak, Intensive, Pre- Rinse cycles: 2...
Programme chart Down bedding 40°C to 75°C 1 duvet Items Down-filled duvets Notes – Observe the instructions on the care label. – Remove any air before washing. To do this, either push the items into a narrow laundry bag to compress them or tie the items together with a washable strap.
Programme chart Workwear Oil/fat special 60°C to 90°C Max. load 8.0 kg Items Work coats, work jackets, hats, cleaning cloths made from cotton or mixed fibres Notes – Activate Pre-wash for heavy soiling. – Use special detergent to improve the wash results. 1400 rpm Extras: Pre-wash, Soak, Intensive, Rinse plus, Rinse cycles: 3...
Programme chart Dis. RKI 70°C/10 min Max. load 8.0 kg Items Cotton or mixed fibre textiles, sorted by colour, provided they are suitable for disinfection. Notes – Chemo-thermal disinfection with a 10-minute holding time at 70°C. – Single-bath disinfection process. – Use a detergent approved by the Robert Koch Institute. –...
Programme chart Laundry (CFPP 01-04) Disinfection 71°C 71°C Max. load 4.5 kg Items Cotton or mixed fibre textiles, sorted by colour, provided they are suitable for disinfection. Notes – Disinfection with a 3-minute holding time at 71°C. – The spin speed cannot be modified. –...
Programme chart Disinfection 70°C/10 min Max. load 8.0 kg Items Cotton or mixed fibre textiles, sorted by colour, provided they are suitable for disinfection. Notes – Chemo-thermal disinfection with a 10-minute holding time at 70°C. – No water intake via the fabric softener compartment. 1400 rpm Extras: Pre-wash, Pre-rinse, Rinse plus Rinse cycles: 2...
Programme chart Disinfection 75°C/10 min Max. load 8.0 kg Items Cotton, linen, and mixed fibre textiles Notes – Thermal disinfection with a 10-minute holding time at 75°C. – No water intake via the fabric softener compartment. 1400 rpm Extras: Pre-wash, Pre-rinse, Rinse plus Rinse cycles: 2 Disinfection 70°C/17 min...
Programme chart WetCare silks Cold to 30°C Max. load 3.5 kg Items Textiles or silk items that cannot be washed and are prone to creasing Notes – A finishing bath is applied after washing. – Use a liquid finishing agent for impregnation; add the detergent to the fabric softener compartment.
Programme chart Special programmes You can put together 5 special – programmes and assign your own – programme names. Enter these into the tables. – Load: max. 8.0 kg – – Example: Intensive Plus – – Pre-wash intensive – – Intensive wash, 90°C –...
Extra options You can supplement the wash Intensive programmes with Extras. For hard-wearing laundry that is very Not all Extras can be selected with heavily soiled. Cleaning efficiency is every programme. If an Extra is not increased through more intense listed, it is not permitted for use with mechanical action and the application this wash programme.
Special features in the programme sequence Spinning Anti-crease At the end of the programme, the drum Final spin speed continues to turn at intervals for up to When a programme is selected, the 30 minutes to help prevent creasing. maximum spin speed for this wash The door can be opened at any time programme is shown in the display.
Changing the programme sequence Switching on the washing A programme cannot be cancelled or machine after an interruption changed when operating a payment system. to the power supply If the washing machine is switched off Changing a programme with the button during a wash programme, the programme will be After the successful start of a programme it is no longer possible to...
Changing the programme sequence The wash programme will continue. Adding or removing laundry You can add or remove items during the The safety lock will remain activated if first few minutes after the programme the temperature in the drum is above has started.
Cleaning and care Cleaning the detergent Risk of electric shock! dispenser drawer Only ever perform cleaning and maintenance work when the Washing at low temperatures and the appliance is disconnected from the use of liquid detergent can lead to a power.
Cleaning and care Cleaning the siphon and the channel Cleaning the detergent dispenser drawer housing Pull the siphon out of the compartment. Use a bottle brush to remove Clean the siphon under warm running detergent residues and limescale water.
Cleaning and care Cleaning the drum, suds Cleaning the filters in the water container and drainage system inlet The drum, suds container, and drainage The washing machine has filters to system can be cleaned if necessary. protect the water inlet valves. Check these filters about every 6 months or ...
Cleaning and care Withdraw the filter at the bar with pointed pliers and rinse it clean under running water. Reassemble the filter and seal in the reverse order and reconnect the hose. Replace the filters after cleaning.
With the help of the following guide, minor faults in the performance of the appliance, some of which may result from incorrect operation, can be remedied without contacting Miele. This will save you time and money because you will not need a service call.
Miele. electricity supply. Wait at least 2 minutes before reconnecting the washing machine to the mains. Then switch the washing machine on again. Start the programme again. If the fault message appears again, contact Miele.
The washing machine or the drain valve is leaking. Machine is leaking Turn off the tap. Call Miele. The messages will appear at the end of the programme and when the washing machine is switched on and need to be confirmed with the OK sensor.
Problem solving guide An unsatisfactory wash result Problem Possible cause and remedy Liquid detergent does Liquid detergents usually contain no bleaching not give the required agents. They do not remove fruit, coffee and tea result. stains. Use a general purpose powder detergent containing a bleaching agent.
Problem solving guide General problems with the washing machine Problem Possible cause and remedy The machine shakes The machine feet are not level. during the spin cycle. Level the machine and adjust the feet correctly. The pump makes This is not a fault. Slurping noises occur at the end of strange noises.
Problem solving guide Problem Possible cause and remedy There is water next to CapDosing sensor was not activated or an empty the capsule in the fabric capsule was not removed at the end of the last wash softener compartment. programme. ...
Problem solving guide Emptying the drum Opening the door in the event of a blocked drain outlet and/ ..in machines with a drain pump or power cut Place a suitable container under the access flap. Risk of electric shock! Only ever perform cleaning and Remove the drain filter, though not maintenance work when the...
Problem solving guide Cleaning the drain filter Risk of water damage. Once the flow of water ceases: Make sure the drain filter is securely tightened. Otherwise there is a risk of water leakage during use. Replace the drain filter correctly and tighten it securely.
Problem solving guide Emptying the drum Opening the door ...in machines with a drain valve Danger of injury due to rotating drum! Reaching into a moving drum is extremely dangerous. Danger of injury! Always make sure that the drum is stationary before reaching in to remove laundry.
Miele. from Miele. Contact information for Miele can be found at the end of this booklet. Please quote the model and serial number of your appliance when contacting Miele. This information can be found on the data plate.
Installation Front view a Cold water inlet hose e Detergent dispenser drawer b Hot water inlet hose f Door c Electrical connection g Access to drain filter, drain pump or valve and emergency release d Control panel h Height-adjustable feet...
Installation Rear view a Electrical connection g Safety caps for transit bars b Interface for communicating with h Transport clips for hoses external devices i Drain pipe (AV version) c Socket for external dispensing j Module slot (for external system communication module) d Drain hose (LP version) k Holder for removed transit bars...
The washing machine must not be connected to devices such as timers which would switch it off automatically. This washing machine can be installed with a Miele tumble dryer on top of it. A stacking kit (APCL001, optional accessory) is required for this.
Installation Transporting the washing machine to Transporting the washing its installation site machine to its installation site The protruding lid can be used for Danger of injury from incorrect holding the machine during transport. transport. Danger of injury due to If the washing maching tips over, there is a danger of injury to people unsecured lid.
Installation Installation surface Removing the transit bars A concrete floor is the most suitable installation surface. It is far less prone to vibration during the spin cycle than wooden floorboards or a carpeted surface. The machine must be level and securely positioned.
Installation Then pull the transit bar out. Then pull the transit bar out. Risk of injury from sharp edges! There is a risk of injury when reaching into holes that are not covered. The holes for the transit bars must be covered after the transit bars have been removed.
Installation Aligning the washing machine The washing machine must stand perfectly level on all four feet to ensure safe and proper operation. Incorrect installation may increase electricity and water consumption and may cause the machine to move about. Screwing out and adjusting the feet The four adjustable screw feet are used for levelling the washing machine.
(optional accessory). housing. Please also check this for The necessary reprogramming must be the feet which did not need carried out by Miele. adjustment. Coins/tokens must be removed from the coin box regularly. Otherwise, the payment system will become blocked.
100 kPa (1 bar) and must not exceed an overpressure of Maintenance 1000 kPa (10 bar). If it is higher than Only use a genuine Miele hose should 1000 kPa, a pressure reduction valve you ever need a replacement. must be installed. A filter is located in the open end of...
Installation Screw on the hot water hose. Hot water connection* The hot water temperature must not IMPORTANT Australia and New exceed 70°C. Zealand To minimise energy consumption during This appliance must be installed operation with hot water, the washing according to AS/NZS 3500.1 and AS/ machine should be connected to a NZS 3500.2.
(gully). If required, the hose can be extended to a length of up to 5 m. The necessary parts can be ordered from Miele (depending on country). For a delivery head of more than 1 m (up to a max. of 1.6 m) a replacement drain pump will need to be fitted.
Observe the instructions in safety of the appliance (e.g. danger of the wiring diagram. Conversion may overheating). only be performed by Miele or a Miele authorised service technician. If the appliance is hard wired, a dual circuit breaker must be provided on The washing machine must not be site.
Technical data Height 850 mm Width 596 mm Width (for appliances with a stainless steel 605 mm lid) Depth 714 mm Depth with door open 1,132 mm Weight Approx. 100 kg Maximum floor load in operation 3,000 Newton Capacity 8.0 kg dry laundry Supply voltage See data plate on back of machine Rated load See data plate on back of machine Fuse rating...
You can change the Supervisor level access code to protect the washing machine from unauthorised access. Please inform Miele if you have forgotten your new code. Miele will have to reset the code. Make a note of your new code and...
Supervisor level Set languages Operation/display The languages for the setting Language Language entry International can be changed. The display can be set to appear in 6 languages can be selected. All one of several different languages. You languages are available. can selected the permanent operator language via the Language submenu.
Supervisor level Time Volume After selecting the clock format, you The volume for various signal tones can set the time of day. can be changed. Clock format – Finish tone – 24 h clock – Keypad tone – 12 h clock – Welcome tone –...
Supervisor level "Display" off status "Machine" off status The display switches off to save In order to save energy, the washing energy. The Start/Stop sensor flashes machine will switch off automatically slowly. after the end of the programme or if no further selection is made.
Logo If “Laundrette basic” or “Laundrette extended” is selected, the Supervisor You can choose whether the “Miele level can no longer be opened from the Professional” logo or your own logo display after the Supervisor level is appears in the display.
Supervisor level Control options Favourite programmes Standard (factory default setting). You can save up to 12 of your own customised wash programmes as All functions and programmes can be Favourite programmes. displayed. Laundrette basic (4 programmes) The saved programmes will be displayed under Favourites.
Supervisor level Special programmes Prog. colour allocation You can put together 5 special You can assign a colour to a Favourite programmes and save them as programme. In the Favourites list, washing programmes with your own each Favourite programme is given a programme names.
Supervisor level Pre-wash temp. Cottons Process technology In the Cottons programme, you can Anti-crease select the temperature of the pre- The anti-crease function helps prevent wash. creasing if laundry is not going to be – 30°C (factory setting) removed immediately after the end of the programme.
Supervisor level Minimum iron Cottons rinses In the Cottons programme, you can In the Minimum iron programme, you change the number of rinse cycles can select the duration of the main that are carried out. wash. – 2 rinse cycles (factory setting) –...
Supervisor level If the automatic load control is Service interval deactivated, the machine will always Service information can appear in the carry out the programme sequence display. You can configure whether a based on a full load. date or the number of operating hours Factory setting: On is displayed.
– Off (factory setting) operated with a peak load system if this system is connected to the washing – Make contacts machine via the Miele XCI box. The suction lances have a normally – No function (factory setting) open contact.
Supervisor level COM module selection Resets the Wi-Fi login (network) to immediately re-establish a new Your washing machine is equipped connection. with an integrated Wi-Fi module. – Reset (visible if set up) However, the machine can also be fitted with an external module. The network is no longer set up.
Miele’s RemoteUpdate function can only be used if the washing machine is connected to a Wi-Fi network and you have an account in the Miele Professional App. The washing machine must be registered with your account in the app.
Supervisor level SmartGrid Machine parameters SmartGrid setting (available Suds cooling depending on country) is only visible if Additional water flows into the drum at a Wi-Fi network is set up and the end of the main wash to cool the activated.
Supervisor level Only cold water is used for the main Low water pressure wash. If the water pressure is below 100 kPa – hot (1 bar), the programme will be cancelled and the fault message Hot water is also added for the main Check water inlet will appear.
These items of software/software components are protected by copyright. The copyright powers of Miele and third parties must be respected. In addition, the appliance contains software components which are distributed under open source licensing terms.
Payment system Setting the feedback signal for the External hardware is connected via the payment system. Miele XCI box. – Factory setting: Off If you wish to change the settings later, please contact Miele. – At the end of the programme...
Supervisor level Payment system lock To avoid tampering, a programme lock can be set up in programme operation. If the lock is applied, the programme is interrupted and payment credit is lost as soon as the door is opened. To offer the possibility to add laundry, the time when the lock activates can be adjusted.
Miele Australia Pty. Ltd. ACN 005 635 398 ABN 96 005 635 398 Melbourne: 1 Gilbert Park Drive Knoxfield, VIC 3180 Telephone: 1300 731 411 firstname.lastname@example.org www.miele-professional.com.au email@example.com Miele New Zealand Limited IRD 98 463 631 Level 2, 10 College Hill...