Ricoh 3406WD Setting Manual page 22

1. System Settings
Default: [Medium]
Warm-up Beeper (copier/Document Server)
You can have the beeper sound when the machine becomes ready to copy after leaving Energy Saver
1
mode, or when the power is turned on.
Default: [On]
If the Panel Key Sound setting is [Off], the beeper does not sound, whatever the Warm-up Beeper
Notice setting.
Copy Count Display (copier/Document Server)
The copy counter can be set to show the number of copies made (count up) the number of copies yet
to be made (count down).
Default: [Up]
Function Priority
Specify the mode to be displayed immediately after the operation switch turned on, or when System
Reset mode is turned on.
Default: [Copier]
Print Priority
Print Priority is given to the mode selected.
Default: [Display Mode]
When [Interleave] is selected, the current print job will be interrupted after maximum of five sheets.
Function Reset Timer
You can set the length of time the machine waits before changing modes when using the multi-access
function.
This is useful if you are making many copies and have to change settings each copy. If you set a longer
reset period, you can prevent interruption from other functions.
Default: [Set Time], [3 second(s)]
When you select [Set Time], enter the time (3-30 seconds, in 1 second increments) using the number
keys.
The Function Reset Timer setting is ignored if [Interleave] or [Job Order] is set for Print Priority.
Output: Printer
Specify a tray to which documents are delivered.
Default: [Upper Paper Exit]
Key Repeat
You can enable or disable repetition of an operation if a key on the screen or control panel is pressed
continuously.
Default: [Normal]
20