Ricoh 3406WD Setting Manual page 23

System Status/Job List Display Time
Specify how long to display the System Status and Job List display for.
Default: [On], [15 second(s)]
By selecting [On], you can specify a display time between 10 and 999 seconds.
Interleave Print
You can set the timing for changing modes when [Print Priority] has been set [Interleave].
Default: [10 sheet(s)]
You can set the number from 1 to 20 sheets using the number keys.
Feed Start Method
Specify whether feeding starts automatically or after pressing the [Start] Key.
Default: [Auto]
Original Feed Delay 2
Specify the duration of the pause immediately after originals are first fed into the machine. If originals
frequently feed in slanted, or you are using special originals, set the delay accordingly.
Default: [1 second(s)]
The time can be set from 1 to 5 seconds.
Original Feed Delay 1
Specify the duration of delay before an original is fed into the machine after being set. If originals
frequently feed in slanted, or you are using special originals, set the delay accordingly.
Default: [1 second(s)]
The time can be set from 0 to 5 seconds.
Fine Ratio Adjustment: Copier
Depending on paper type, environment, and humidity, copy paper can expand or shrink slightly. This
means that the size of the copy and the original do not match. if this happens, specify the vertical and
horizontal correction ratio. You can specify this setting for each paper type (plain, translucent, film
and recycled paper).
CBB001
General Features
1
21