1. System Settings
Notify Machine Status
You can send notification of the machine's status to the @Remote center.
This function is available only if the @Remote service is enabled and active.
1
Service Mode Lock
For details about this function, consult your administrator.
Firmware Version
You can check the version of the software installed in this machine.
Network Security Level
For details about this function, consult your administrator.
Auto Erase Memory Setting
For details about this function, consult your administrator.
Erase All Memory
For details about this function, consult your administrator.
Delete All Logs
For details about this function, consult your administrator.
Transfer Log Setting
For details about this function, consult your administrator.
Fixed USB Port
Specify whether or not to fix the USB port.
Default: [Off]
If set to [Level 1]
It is not necessary to install a new driver when the printer driver of this machine has already been
installed on the PC.
If set to [Level 2]
Please contact your service representative for details.
Program / Change / Delete Realm
Program the realm to be used for Kerberos authentication.
• Realm Name
• KDC Server Name
• Domain Name
Be sure to set both the realm name and KDC server name when programming a realm.
For details about Program/Change/Delete Realm, see "Programming the Realm".
54