Table of Contents
Advertisement
3. Using a Printer Server
19.
In the [Print Server Name] box, enter the print server name.
Use the same print server name specified using Web Image Monitor.
20.
Select the [Define additional properties] check box, and then click [Create].
21.
Click [Assignments], and then click [Add] in the [Assignments] area.
22.
In the [Available objects] box, click the queue you created, and then click [OK].
23.
Check the settings, and then click [OK].
24.
Start the print server by entering the following from the console of the NetWare server.
3
If the print server is in operation, quit and restart it.
To quit
CAREE: unload pserver
To start
CAREE: load pserver [print server name]
Setting up using Web Image Monitor
1.
Start Web Image Monitor.
2.
Click [Login].
A dialog box for entering the login user name and login password appears.
3.
Enter the login user name and password, and then click [Login].
For details about the login user name and password, consult your network administrator.
Depending on the configuration of your Web browser, the login user name and password might be
saved. If you do not want to save them, configure your Web browser's settings so that this information
is not saved.
4.
In the menu area, click [Configuration].
5.
Under "Network", click [NetWare].
6.
Confirm the settings, and then click [OK].
Configuration is now complete. Wait several minutes before restarting Web Image Monitor.
7.
Click [Logout].
8.
Quit Web Image Monitor.
• If you cannot identify the printer you want to configure, check the printer name against the
configuration page printed from the printer.
• If no printer names appear in the list, match the frame types of IPX/SPXs for the computer and printer.
Use the [Network] dialog box of Windows to change the frame type of the computer.
• For details about Web Image Monitor, see "Using Web Image Monitor".
104
Hide quick links:
Advertisement
Table of Contents
