Ricoh 3406WD Setting Manual page 30

1. System Settings
When level 1 or 2 are selected for translucent paper, and you make copies on paper of size A1 or
above continuously, the interval between each copying may take longer. Even if you make copy on
one sheet only, it may takes 1 minute until the next copy job starts.
1
Paper Thickness: Paper Bypass
Specify the thickness of paper placed in the paper bypass.
If the copy image blurs or the translucent paper becomes loose, changing the paper thickness level
may improve the situation.
Default for Plain Paper: [3]
Default for Recycled Paper: [3]
Default for Translucent Paper: [2]
Default for Film: [3]
For information on the available settings, see the table titled "Paper Thickness: Paper Tray".
Paper Volume
Specify the initial remaining volume of roll paper to be displayed for each paper tray.
The system monitors the amount of paper used, and automatically determines the remaining volume,
based on the specified initial remaining volume.
We recommend that you specify an appropriate remaining volume each time a paper tray is loaded.
Select "New (Full)" when a paper tray is loaded with a new 150 m roll of paper.
Default: [New (Full)]
• For details on how to access System Settings, see "Accessing User Tools".
• p.17 "Accessing User Tools"
28