Section 8: Cleaning; Safety Messages (Review Carefully) - HID Fargo DTC4500 User Manual

Card printer / encoder
Hide thumbs Also See for Fargo DTC4500:
Table of Contents

Advertisement

© 2010 HID Global Corporation

Section 8: Cleaning

The Card Printer is built to require a minimum amount of maintenance. Nevertheless, there are a few
procedures you can perform on a regular basis or as needed to ensure the best possible performance

Safety Messages (review carefully)

Symbol
Danger:
Caution:
DTC4500 Card Printer/Encoder User Guide
Critical Instructions for Safety purposes
Failure to follow these installation guidelines can result in
death or serious injury.
Information that raises potential safety issues is indicated by a
warning symbol (as shown to the left).
To prevent personal injury, refer to the following safety
messages before performing an operation preceded by this
symbol.
To prevent personal injury, always remove the power
cord prior to performing repair procedures, unless otherwise
specified.
To prevent personal injury, make sure only qualified
personnel perform these procedures.
This device is electrostatically sensitive. It may be
damaged if exposed to static electricity discharges.
Information that raises potential electrostatic safety issues is
indicated by a warning symbol (as shown to the left).
To prevent equipment or media damage, refer to the
following safety messages before performing an operation
preceded by this symbol.
To prevent equipment or media damage, observe all
established Electrostatic Discharge (ESD) procedures while
handling cables in or near the Circuit Board and Printhead
Assemblies.
To prevent equipment or media damage, always wear an
appropriate personal grounding device (e.g., a high quality
wrist strap grounded to avoid potential damage).
To prevent equipment or media damage, always remove
the Ribbon and Cards from the Printer before making any
repairs, unless otherwise specified.
To prevent equipment or media damage, take jewelry off
of fingers and hands, as well as thoroughly clean hands to
remove oil and debris before working on the Printer.
All rights reserved
94

Advertisement

Table of Contents
loading

Table of Contents