Contextid=152 Selecting The Calibrate Ribbon Tab - HID Fargo DTC4500 User Manual

© 2010 HID Global Corporation
|contextid=152
The two buttons for the Calibrate Ribbon tab are described below.
• Calibrate button: Sends the Calibrate Ribbon Command to Printer. Follow the instructions below to
set up the Printer.
• Help button: Launches help specific to this tab.
Step Procedure
1 Select the Calibrate Ribbon tab.
a. Ensure that the Ribbon Cartridge is removed.
b. Ensure the Printer's Cover is closed.
c. Click on the Calibrate button. (Note: The Printer's LCD will display
CALIBRATE PASSED.)
d. Click on the OK button on the LCD display to complete the procedure.
DTC4500 Card Printer/Encoder User Guide
Selecting the Calibrate Ribbon tab
All rights reserved
35