Reviewing The Iso Track Locations - HID Fargo DTC4500 User Manual

© 2010 HID Global Corporation
Using the Magnetic Encoding Tab – Custom Encoding or Raw Binary
Encoding Mode
Window TAB

Reviewing the ISO Track Locations

The magnetic Encoding Module encodes onto tracks in accordance with an ISO 7811-2 Magnetic Stripe.
For track locations, review the display below.
0.223" 0.353" 0.493"
TRACK1 0.110"
TRACK2 0.110"
TRACK3 0.110"
DTC4500 Card Printer/Encoder User Guide
Procedure
Select No LRC to change the
LRC Generation to none.
Select Even Parity to change
the LRC Generation to Even
Parity. (Note: This is the default
for all tracks.)
Select No Parity to change the
Character Parity to none.
Select Even Parity to change
the Character Parity to Even
Parity.
Reverse Bit Order is used to
reverse the character bits and is
used for the encryption of data
in specific programs
Procedure (continued)
Select Odd Parity to change
the LRC Generation to Odd
Parity.
Select Odd Parity to change
the Character Parity to Odd
Parity. (Note: This is the
default for all tracks.)
Add Leading Zeros is used to
add a set number of leading
zeros to the magnetic string in
order to move the starting
point of the encoded data in
specific programs for
encryption of data.
0.130"
0.140"
All rights reserved
57