Parameters - Jadever JCN User Manual

5-2 Parameters

SET00
1)
SET01
2)
Options are On, OFF, and AUTO
= Backlight
= No backlight
= Auto-on after getting a stable weigh data or any key is pressed. But auto off after N
seconds (N=2s, 5s, 10s, 20s, ever) with no action.
(ever=the backlight lasts forever with more than 9d placed on the pan) when it is stable.
SET02
3)
options are : kg kg，kg g，g g，lb lb
E.g. When Kg, G is selected, means weighing window current using unit is kg and unit
weight window current using unit is g
How to set current using units?
When parameter SET02 UNIT is selected, press SMPL to choose the desired unit,
press M+/SAVE to save the setting , then press
parameter setting.
SET03
4)
d0 (one division) , d1 (2 divisions), d2 (3 divisions), d3 (4 divisions), d4 (5 divisions) and
d5 (6 divisions)
SET04
5)
OFF = previously set quantity checking values are not retained when the unit is turned on.
ON = previously set quantity checking values are retained when the unit is turned on.
SET05
6)
On: it starts checking weight when the weight and
and the stable symbol appears.
Off: it starts checking weight
SET06
7)
Hi: There will be a warning sound when the material quantity is more than the upper limit,
and the weight of the material is more than 20 divisions
internal code checking
backlight modes shifting
current using units setting (for weighing window and unit weight window)
zero range setting: d0, d1, d2, d3, d4, d5.
whether to save the upper & lower limit of quantity
stable weight checking setting: on, off
once the weight and
beep setting: Hi，ok ，Lo，out，no.beep
 
/MR or TARE/
checking:
quantity are within the checking range
quantity are within the checking range
to advance to next
on, off
6