Keyboard - Jadever JCN User Manual

4-2-2 Keyboard

0 ~9
1) numeric keys
2) ●
key
Decimal point
SMPL
key Short press
3)
after sampling. And shift Units when
G N/SET
4) key Shift the displays of Gross weight and Net weight after tare. Long press to
enter parameters setting. And turn on or
setting.
UWS/ITEM
5) key Find out the unit weight in memory or
the indicated unit weight via numeric keys and press it to start counting function.
M+/SAVE
6) key Accumulate the records of counting or weighing. Save the changing
parameter. Set the capacity and resolution.
M-/HI
7) key Clear the input figures. Set the value of HI. Enable the blinking figure plus
one when inputting the figures.
ZERO/ESC
8) key
Exit from the setting

9) /MR
Recall and display
key
number of weightments ) and the first 10 records in details. Circle the choices in the
setting. Make the blinking spot shift leftwards when inputting the figures.
PRINT/LO
10) key Press the key to print when printing manually is selected. Set the LO
value. Enable the blinking figure decrease one when inputting the figures.

TARE/
11)
key
the indicated value entered via the numeric keys as a pre-set Tare value ; cancel tare
Display
action.
rightwards when inputting the figures.
Enter specific values for tare; unit weight and other data entries.
to enter
Zero the display (within 2% of max.capacity) or
without saving.
the total Accumulation data (weight, total count and
Input the weight of the object on the weighing pan as a Tare value ; Inputs
the first 10 records in detail. Make the blinking spot shift
rightwards
the sampling mode. Long press
setting capacity.
turn off check weighing when entering HI, LO, OK
reset the unit weight again. Input
to close ACAI
cancel Tare action.
4