Initialization Of The Scale To Printer (Optional) - Jadever JCN User Manual

Symbol ― ‖ pointing at
weighing mode in a second .Remove the first piece
3) Put the second piece of load on, and then press key
accumulation event into memory. Repeat step 2-3 till accumulation actions are finished.
Note: Maximum is 99 pieces. It is able to calculate the second deal when returning to zero
after the first one under the condition of more than (or equal to) 20d with stability.
and gross weight can't be accumulated. After resetting the sample value or unit weight, the
quantity accumulated will be adjusted automatically according to the new setting value.
Accumulation display

/MR
1) Press key
weighments)

/MR
2) Press key
the first 10 accumulation events in detail.
3) When connecting PC, printer DMP or CK, press
Note：① XX=total accumulation events； XX=the single accumulation
Accumulation clear
To clear the total accumulation data or the first 10 accumulation events, press key

TARE/
to shift the events and then press key
when the total accumulation data is deleted.

7-6 Initialization of the Scale to Printer (Optional)

G N/SET
Press
Step 1
weighing mode to enter parameter setting. Press key
the parameters and select
G N/SET
Press

TARE/
Step 2
The window of unit weight displays the type of printer. And the window of total
amount displays UNSU or init？。
"M+". The display reverts to normal
to displays the total accumulation data (weight,

TARE/
or to check the total events and
key while powering on or long press
SET08
to enter the external equipment choosing. Press key
to select the type of printers. Press
M+/SAVE
quantity
PRINT/LO
to output the events
Symbol ― ‖ disappears
M-/HI
to clear.

/MR
。
G N/SET
to add the second
Minus weight
and number of

/MR
G N/SET
key in the

TARE/
or to circle

/MR
to start initialization.
or
or
14