Jtag Boundary Scan Connector Pins; Power Connector Pins - Texas Instruments DLP LightCrafter 4500 User Manual

JTAG Boundary Scan
7.11 JTAG Boundary Scan
Table 7-11 lists the JTAG boundary connector (J25) pins. Two matching six-pin, 1.25-mm connector part
numbers are:
• Molex part number: 51021-0600
• Digi-Key part number: WM1724-ND
The corresponding connector terminal (crimp) part numbers are:
• Molex part number: 50079-8100
• Digi-Key part number: WM2023-ND
7.12 Power
Table 7-12 lists the power socket (J26) pins. Two matching connector part numbers are:
• Switchcraft part number: 760
• Digi-Key part number: SC1051-ND
68
Connectors
Table 7-10. FPD-Link Connector Pins (continued)
Description Pin
RXE_EP 14
Ground 15
Ground 16
RXE_DN 17
RXE_EN 18
NC 19
NC 20
Table 7-11. JTAG Boundary Scan Connector Pins
Description Pin
TRST 1
TDI 2
TMS1 3
TDO1 4
TCK 5
Ground 6
Table 7-12. Power Connector Pins
Description Pin
Input supply 1
Ground 2
Ground 3
Copyright © 2013–2015, Texas Instruments Incorporated
Supply Range
1.2 V
0 V
0 V
1.2 V
1.2 V
N/A
N/A
Supply Range
3.3 V
3.3 V
3.3 V
3.3 V
3.3 V
Ground
Supply Range
12 V
0 V
0 V
DLPU011E – July 2013 – Revised September 2015
Submit Documentation Feedback
www.ti.com