Uart Connector Pins; C0 Connector Pins; C1 Connector Pins - Texas Instruments DLP LightCrafter 4500 User Manual

www.ti.com
7.3 DLPC350 UART
The DLPC350 UART compatible cable:
• Leopard Imaging: LI-SER-01
• Mouser part number: 931-LI-SER-01
Table 7-3 lists UART connector (J20) pins.
7.4 DLPC350 I2C0
Table 7-4 lists the I2C0 connector (J16) pins. Two matching four-pin, 1.25-mm connector part numbers
are:
• Molex part number: 51021-0400
• Digi-Key part number: WM1722-ND
The corresponding terminal (crimp) part numbers are:
• Molex part number: 50079-8100
• Digi-Key part number: WM2023-ND
7.5 DLPC350 I2C1
Table 7-5 lists the I2C1 connector (J17) pins. Two matching four-pin, 1.25-mm connector part numbers
are:
• Molex part number: 51021-0400
• Digi-Key part number: WM1722-ND
The corresponding terminal (crimp) part numbers are:
• Molex part number: 50079-8100
• Digi-Key part number: WM2023-ND
DLPU011E – July 2013 – Revised September 2015
Submit Documentation Feedback
Table 7-3. UART Connector Pins
Description Pin
Ground 1
RX 2
TX 3
2
Table 7-4. I

C0 Connector Pins

Description Pin
2
I C SCL 1
2
I C SDA 2
3.3-V supply 3
Ground 4
2
Table 7-5. I

C1 Connector Pins

Description Pin
2
I C SCL 1
2
I C SDA 2
3.3-V supply 3
Ground 4
Copyright © 2013–2015, Texas Instruments Incorporated
Supply Range
0 V
3.3 V
3.3 V
Supply Range
3.3 V
3.3 V
3.3 V
0 V
Supply Range
3.3 V
3.3 V
3.3 V
0 V
DLPC350 UART
65
Connectors