Fan Connector Pins; Red Led Connector Pins - Texas Instruments DLP LightCrafter 4500 User Manual

Fan
7.6 Fan
Table 7-6 lists the fan connector (J22) pins. Two matching three-pin, 1.25-mm connector part numbers
are:
• Molex part number: 51021-0300
• Digi-Key part number: WM1722-ND
The corresponding terminal (crimp) part numbers are:
• Molex part number: 50079-8100
• Digi-Key part number: WM2023-ND
7.7 Red LED
Table 7-7 lists the red LED connector (J31) pins. Two matching nine-pin, 1.5-mm connector part numbers
are:
• Molex part number: 87439-0900
• Digi-Key part number: WM2093-ND
The corresponding terminal (crimp) part numbers are:
• Molex part number: 87421-0000
• Digi-Key part number: WM1112-ND
7.8 Green LED
Table 7-8 lists the green LED connector (J32) pins. Two matching six-pin, 1.5-mm connector part numbers
are:
• Molex part number: 87439-0600
• Digi-Key part number: WM2093-ND
The corresponding terminal (crimp) part numbers are:
• Molex part number: 87421-0000
• Digi-Key part number: WM1112-ND
66
Connectors
Table 7-6. Fan Connector Pins
Description Pin
Power 1
FAN_LOCKED 2
Ground 3
Table 7-7. Red LED Connector Pins
Description Pin
Ground 1
Temperature sensor 2
3.3-V supply 3
Red anode 4
Red anode 5
Red anode 6
Red cathode 7
Red cathode 8
Red cathode 9
Copyright © 2013–2015, Texas Instruments Incorporated
Supply Range
12 V
3.3 V
0 V
Supply Range
0 V
3.3 V
3.3 V
3 V
3 V
3 V
0 V
0 V
0 V
DLPU011E – July 2013 – Revised September 2015
Submit Documentation Feedback
www.ti.com