Advertisement

Quick Links

www.ti.com
EVM User's Guide: DLPCLCR160CPEVM
DLP
®
LightCrafter
Description
®
The DLP
LightCrafter
Module (EVM) is designed to enable microcontroller
(MCU) generated graphics display without the need
of a video processor, opening new possibilities
for affordable DLP free-form on-demand display
implementations in industrial and personal electronic
applications such as appliances, human machine
interface, robotics, and toys. This EVM features
DLP160CP
chipset including DLPC3421, .16 nHD
DLPU131 – NOVEMBER 2023
Submit Document Feedback
Display 160CP Evaluation Module
Display .16 nHD Evaluation
Copyright © 2023 Texas Instruments Incorporated
(360x640) optical engine, and
image generation out of the box.
Features
Small form factor (66 mm x 56 mm)
First DLP display EVM capable of displaying MCU
generated content
Easily evaluate image display from Micro SD card
MSPM0G MCU family compatible (JTAG, UART
supported)
DLP
®
LightCrafter
Description
MSPM0G3507
MCU for
Display 160CP Evaluation Module
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DLP LightCrafter 160CP and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Texas Instruments DLP LightCrafter 160CP

  • Page 1 MSPM0G MCU family compatible (JTAG, UART interface, robotics, and toys. This EVM features supported) DLP160CP chipset including DLPC3421, .16 nHD DLPU131 – NOVEMBER 2023 ® LightCrafter ™ Display 160CP Evaluation Module Submit Document Feedback Copyright © 2023 Texas Instruments Incorporated...
  • Page 2: Kit Contents

    The DLPDLCR160CPEVM is designed to operate at a maximum ambient temperature of 30°C. A block diagram of the DLPDLCR160CPEVM is shown in Figure 1-1. Figure 1-1. DLPDLCR160CPEVM Block Diagram ® LightCrafter ™ Display 160CP Evaluation Module DLPU131 – NOVEMBER 2023 Submit Document Feedback Copyright © 2023 Texas Instruments Incorporated...
  • Page 3: Device Information

    20 lumens out of the box for image or informational video display in a very small volume form factor. The DLPDLCR160CPEVM is not a production design, and is intended for evaluation only. DLPU131 – NOVEMBER 2023 ® LightCrafter ™ Display 160CP Evaluation Module Submit Document Feedback Copyright © 2023 Texas Instruments Incorporated...
  • Page 4 Hardware www.ti.com 2 Hardware 2.1 EVM Images Figure 2-1. DLPDLCR160CPEVM Unit (top view) Figure 2-2. DLPDLCR160CPEVM Unit (perspective view) ® LightCrafter ™ Display 160CP Evaluation Module DLPU131 – NOVEMBER 2023 Submit Document Feedback Copyright © 2023 Texas Instruments Incorporated...
  • Page 5: Safety Instructions

    Do not leave EVM powered when una e nded. ¤ CAUTION o n hot surface. Contact may cause burns. Do not touch. ¥ DLPU131 – NOVEMBER 2023 ® LightCrafter ™ Display 160CP Evaluation Module Submit Document Feedback Copyright © 2023 Texas Instruments Incorporated...
  • Page 6 Long (>2 sec) button (J2) press to confirm the menu The user action results in a button press animation to Confirm menu selection selection. confirm selection. ® LightCrafter ™ Display 160CP Evaluation Module DLPU131 – NOVEMBER 2023 Submit Document Feedback Copyright © 2023 Texas Instruments Incorporated...
  • Page 7 MCU and displayed until the new image is transferred. The images on the card are cycled through while in this mode. DLPU131 – NOVEMBER 2023 ® LightCrafter ™ Display 160CP Evaluation Module Submit Document Feedback Copyright © 2023 Texas Instruments Incorporated...
  • Page 8 Refer to the following documentation links for more detailed information: • DLPC3421 Software Programmer's Guide ® LightCrafter ™ Display 160CP Evaluation Module DLPU131 – NOVEMBER 2023 Submit Document Feedback Copyright © 2023 Texas Instruments Incorporated...
  • Page 9 Connect power supply to board. g. Turn on power to board. Figure 3-1. LP-XDS110 Debug Probe and EVM Figure 3-2. XDS110 Debug Probe Assembly DLPU131 – NOVEMBER 2023 ® LightCrafter ™ Display 160CP Evaluation Module Submit Document Feedback Copyright © 2023 Texas Instruments Incorporated...
  • Page 10 The XDS110 firmware must be updated to v3.0.0.26 (or newer) to support the MSPM0 devices. The XDS firmware can be updated using the UNIFLASH programming tool. c. In the New Configuration tab, select the MSPM0G3507 device, and Texas Instruments XDS110 USB Debug Probe connection: ®...
  • Page 11 If verification fails, then recheck setup and connections and retry programming. Procedure complete. Power down and disconnect cables. k. References: XDS110 Debug Probe User’s Guide (SPRUI94). XDS110 web page, www.ti.com/xds110. DLPU131 – NOVEMBER 2023 ® LightCrafter ™ Display 160CP Evaluation Module Submit Document Feedback Copyright © 2023 Texas Instruments Incorporated...
  • Page 12: Additional Information

    ™ is a trademark of Texas Instruments. ™ is a trademark of Texas Instruments. ® is a registered trademark of Texas Instruments. ® and Cortex ® are registered trademarks of Arm Limited. All trademarks are the property of their respective owners.
  • Page 13 STANDARD TERMS FOR EVALUATION MODULES Delivery: TI delivers TI evaluation boards, kits, or modules, including any accompanying demonstration software, components, and/or documentation which may be provided together or separately (collectively, an “EVM” or “EVMs”) to the User (“User”) in accordance with the terms set forth herein.
  • Page 14 www.ti.com Regulatory Notices: 3.1 United States 3.1.1 Notice applicable to EVMs not FCC-Approved: FCC NOTICE: This kit is designed to allow product developers to evaluate electronic components, circuitry, or software associated with the kit to determine whether to incorporate such items in a finished product and software developers to write software applications for use with the end product.
  • Page 15 www.ti.com Concernant les EVMs avec antennes détachables Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à...
  • Page 16 www.ti.com EVM Use Restrictions and Warnings: 4.1 EVMS ARE NOT FOR USE IN FUNCTIONAL SAFETY AND/OR SAFETY CRITICAL EVALUATIONS, INCLUDING BUT NOT LIMITED TO EVALUATIONS OF LIFE SUPPORT APPLICATIONS. 4.2 User must read and apply the user guide and other available documentation provided by TI regarding the EVM prior to handling or using the EVM, including without limitation any warning or restriction notices.
  • Page 17 Notwithstanding the foregoing, any judgment may be enforced in any United States or foreign court, and TI may seek injunctive relief in any United States or foreign court. Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2023, Texas Instruments Incorporated...
  • Page 18 TI products. TI’s provision of these resources does not expand or otherwise alter TI’s applicable warranties or warranty disclaimers for TI products. TI objects to and rejects any additional or different terms you may have proposed. IMPORTANT NOTICE Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2023, Texas Instruments Incorporated...

This manual is also suitable for:

Dlp lightcrafter dlpclcr160cpevm

Table of Contents