Sequence Settings [Variable Exposure] - Texas Instruments DLP LightCrafter 4500 User Manual

www.ti.com
– Clicking on G0, then clicking the Add Pattern to Sequence button
– Clicking on G1, then clicking the Add Pattern to Sequence button
– Clicking on G2, then clicking the Add Pattern to Sequence button
– Clicking on G3, then clicking the Add Pattern to Sequence button
– Clicking on G4, then clicking the Add Pattern to Sequence button
– Clicking on G5, then clicking the Add Pattern to Sequence button
– Clicking on G6, then clicking the Add Pattern to Sequence button
– Clicking on G7, then clicking the Add Pattern to Sequence button
– Clicking on R0, then clicking the Add Pattern to Sequence button
– Clicking on R1, then clicking the Add Pattern to Sequence button
– Clicking on R2, then clicking the Add Pattern to Sequence button
– Clicking on R3, then clicking the Add Pattern to Sequence button
– Clicking on R4, then clicking the Add Pattern to Sequence button
– Clicking on R5, then clicking the Add Pattern to Sequence button
– Clicking on R6, then clicking the Add Pattern to Sequence button
– Clicking on R6, then clicking the Add Pattern to Sequence button
– Clicking on R7, then clicking the Add Pattern to Sequence button
– Clicking on B0, then clicking the Add Pattern to Sequence button
– Clicking on B1, then clicking the Add Pattern to Sequence button
– Clicking on B2, then clicking the Add Pattern to Sequence button
– Clicking on B3, then clicking the Add Pattern to Sequence button
– Clicking on B4, then clicking the Add Pattern to Sequence button
– Clicking on B5, then clicking the Add Pattern to Sequence button
– Clicking on B6, then clicking the Add Pattern to Sequence button
– Clicking on B7, then clicking the Add Pattern to Sequence button
• This forms 24 1-bit images that are displayed back-to-back at 100-ms exposure. Click on the Send
button to download the pattern sequence to the DLP LightCrafter 4500.

3.3.2 Sequence Settings [Variable Exposure]

When operating in Pattern Sequence [Variable Exposure] mode, use this subtab to set the sequence
settings. All of the sections are identical to the Sequence Settings subtab with the exception that the
Pattern Exposure time and Pattern Period are now set on a per pattern basis rather than set to the same
values for all patterns in the sequence.
DLPU011E – July 2013 – Revised September 2015
Submit Documentation Feedback
Copyright © 2013–2015, Texas Instruments Incorporated
Pattern Sequence Mode
Operating the DLP LightCrafter 4500
35