Table of Contents
Advertisement
Quick Links
DLP
®
LightCrafter™ Display 3010 EVM User's Guide
...........................................................................................................................
Topic
1
DLP
LightCrafter™ Display 3010 EVM Overview
®
2
Applicable Documents
3
What is in the LightCrafter Display 3010 EVM
4
Light Engine
5
Quick-Start Procedure
6
Circuit Description
7
EVM Setup
DLPU029A – October 2014 – Revised January 2015
Submit Documentation Feedback
..........................................................................................
........................................................................................................
..........................................................................................
...............................................................................................
..........................................................................................................
Copyright © 2014–2015, Texas Instruments Incorporated
DLPU029A – October 2014 – Revised January 2015
.....................................................
..........................................................
DLP
®
LightCrafter™ Display 3010 EVM User's Guide
User's Guide
Page
2
2
3
4
4
5
8
1
Advertisement
Table of Contents
Related Manuals for Texas Instruments DLP LightCrafter Display 3010
Summary of Contents for Texas Instruments DLP LightCrafter Display 3010
- Page 1 What is in the LightCrafter Display 3010 EVM ......................Light Engine ..................Quick-Start Procedure ....................Circuit Description ......................EVM Setup DLPU029A – October 2014 – Revised January 2015 ® LightCrafter™ Display 3010 EVM User’s Guide Submit Documentation Feedback Copyright © 2014–2015, Texas Instruments Incorporated...
-
Page 2: Applicable Documents
LEDs and the main connectors. It will give the user a successful start with his first DLP LightCrafter Display 3010 evaluation module. Figure 1. DLP LightCrafter Display complete EVM... - Page 3 System board – includes MSP430, ITE HDMI receiver, USB-Serial Bridge controller and several connectors for external inputs (HDMI, USB, etc.) Figure 2. DLP LightCrafter Display EVM Block Diagram DLPU029A – October 2014 – Revised January 2015 ® LightCrafter™ Display 3010 EVM User’s Guide Submit Documentation Feedback Copyright © 2014–2015, Texas Instruments Incorporated...
-
Page 4: Light Engine
2. Move the SW_ONOFF switch to the ON position to turn the DLP LightCrafter Display 3010 EVM on. When the LightCrafter Display 3010 EVM is turned on, the PROJ_ON LED will turn on. 3. After the DLP LightCrafter Display 3010 EVM is turned on; the projector will default to displaying a DLP LightCrafter Display splash image. -
Page 5: Circuit Description
DMD it is recommended to turn off the projector with the SW_ONOFF before disconnecting the power. 7. There are ten indicator LEDs on the DLP LightCrafter Display 3010 EVM (Table Table 2. LEDs on the DLP LightCrafter Display 3010 EVM... - Page 6 Change of Volume when HDMI input is selected Change LED current total 7 steps PB_RIGHT1 Change of Volume when HDMI input is selected ® LightCrafter™ Display 3010 EVM User’s Guide DLPU029A – October 2014 – Revised January 2015 Submit Documentation Feedback Copyright © 2014–2015, Texas Instruments Incorporated...
- Page 7 Connector for external temperature sensor (Requires removing R21) Connector for light sensor Future use 60 pin connector for DLP LightCrafter Display board DLPU029A – October 2014 – Revised January 2015 ® LightCrafter™ Display 3010 EVM User’s Guide Submit Documentation Feedback Copyright © 2014–2015, Texas Instruments Incorporated...
-
Page 8: Hdmi Connector
EVM Setup www.ti.com EVM Setup The DLP LightCrafter Display 3010 EVM is composed of three parts: • Main board • DLP LightCrafter Display board • Engine with LED connection and Flex cable The main board contains the connector for the power supply, a USB connector to communicate to the DLP LightCrafter™... - Page 9 Ensure a good connection of the flex cable to the DLP LightCrafter™ Display board before turning it on. DLPU029A – October 2014 – Revised January 2015 ® LightCrafter™ Display 3010 EVM User’s Guide Submit Documentation Feedback Copyright © 2014–2015, Texas Instruments Incorporated...
- Page 10 Make sure that everything is setup correctly before continuing! Verify that the flex cable is connected correctly to the LightCrafter Display board. ® LightCrafter™ Display 3010 EVM User’s Guide DLPU029A – October 2014 – Revised January 2015 Submit Documentation Feedback Copyright © 2014–2015, Texas Instruments Incorporated...
-
Page 11: Revision History
Changes from Original (October 2014) to A Revision ....................Page ................• Changed USB-I2C bridge to USB-Serial Bridge controller ........................• Changed block diagram DLPU029A – October 2014 – Revised January 2015 Revision History Submit Documentation Feedback Copyright © 2014–2015, Texas Instruments Incorporated... -
Page 12: Important Notice
IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. - Page 13 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Texas Instruments DLPDLCR3010EVM...
Need help?
Do you have a question about the DLP LightCrafter Display 3010 and is the answer not in the manual?
Questions and answers