15.3
Cleaning
The use of solvents, harsh chemicals or abrasive cleaners leads to damage to the machine!
When cleaning water and mild detergent if necessary use.
Therfore:
Bare surfaces of the machine against corrosion impregnate ( with anti-rust WD40 )
15.4
Maintenance
Clean under the sliding table guide.
All parts (except the bearings of the main saw mandrel) should be lubricated twice weekly.
The inside of the machine base suck monthly.
15.5
Disposal
Do not dispose of the TS 250F-1600 in residual waste. Contact your local
authorities for information regarding the available disposal options. When
you buy at your local dealer for a replacement unit, the latter is obliged to
exchange your old
HOLZMANN Maschinen Austria
www.holzmann-maschinen.at
N O T E
Formátovací pila / panel saw TS 250F-1600
Strana 46